The G7 can be connected to the serial output or common BUS of compatible control panel directly for actual event report reception.

If alarm panel is not supported by G7 via serial output or common BUS, additional 6 zone Expansion Module or Contact ID module can be used instead.

Compatible with

• DSC ® PC1616, PC1832, PC1864
• DSC ® PC585, PC1565, PC5020
• PARADOX ® SPECTRA SP5500, SP6000, SP7000
• PARADOX ® MAGELLAN MG5000, MG5050
• PARADOX ® DIGIPLEX EVO48, EVO192
• PARADOX ® DIGIPLEX NE96, EVO96
• PARADOX ® SPECTRA 1727, 1728, 1738
• PARADOX ® ESPRIT E55
• PARADOX ® ESPRIT 728ULT, 738ULT
• PYRONIX ® MATRIX 424, MATRIX 832, MATRIX 832+
• PYRONIX ® MATRIX 6, MATRIX 816
• GE ® CADDX NX-4, NX-6, NX-8

Main features

• Report events to the AGSR GPRS/IP Monitoring Receiver software via GPRS;
• Backup event report to the Monitoring Receiver via SMS or GSM;
• Report via text SMS to the end user;
• Fast configuration using direct USB connection or using a GPRS connection;
• Firmware upgrades directly on-site or via GPRS;
• Simple installation with 4-wire serial connection;
• Report encryption in GPRS, SMS and GSM modes;
• Module G7 transfers the full report of the chosen security panel in format Contact ID, which is received from the common bus or a serial port;
• Module G7 transfers real time of event and level of GSM communication;
• Communication channel is controled by periodic control signals (PING).

Technical specification

• Power supply voltage: 12 VDC from control panel or from external power
  supply
• Consumption:
  • In standby mode: 60mA
  • In GPRS/GSM transmission mode: 600mA
• Number of inputs: 1 NC input
• Min. interval of communication control (PING): 30 sec
• Number of IP addresses of CMS*: 2
• Number of GSM modems of CMS*: 1
• Operating temperature range: -10°C +55°C
• Overall dimensions: 85x65x25 mm

CMS* - Cental Monitoring Station

Main package contents

• GsmAlarm-G7
• GSM antenna
• Software and user's manual